damascus grand sewing machine manual

The Damascus Grand Sewing Machine is a professional-grade sewing machine with advanced features including computerized stitch selection, automatic needle threading, built-in stitch patterns, adjustable stitch length and width, drop feed for free-motion sewing, LED lighting, speed control, and multiple presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Sewing Operations 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, built-in LED light, bobbin winding system, free arm, multiple presser feet, foot pedal control.

Feature	Description
Computerized control panel	Digital display with stitch selection and settings
Automatic needle threader	Easy threading with push-button operation
Built-in LED light	Bright illumination of sewing area
Bobbin winding system	Automatic bobbin winding with thread cutter
Free arm	For sewing sleeves and hard-to-reach areas
Multiple presser feet	Includes zigzag, buttonhole, zipper, and walking feet
Speed control slider	Adjustable sewing speed from slow to fast
Reverse stitch button	For reinforcing stitches at beginning and end
Stitch length/width dials	Precise adjustment of stitch dimensions
Power switch	Turns machine on/off

Installation

Unpack and inspect contents. Place on stable sewing table.

Remove protective packaging: Take off all foam and tape from machine.
Attach foot pedal: Connect pedal cable to machine port.
Install needle: Loosen needle clamp screw, insert needle with flat side to back.
Connect power: Plug power cord into machine and wall outlet.
Install bobbin: Follow threading diagram for correct bobbin placement.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure stable surface before operation.

First-Time Setup

Power on machine; follow initial setup procedure.

Thread upper thread: Follow numbered threading path from spool to needle.
Use automatic needle threader: Push lever down to thread needle automatically.
Wind bobbin: Place empty bobbin on winder, guide thread, press pedal.
Insert bobbin: Drop bobbin into case with thread following direction arrow.
Test stitches: Select basic straight stitch and test on fabric scrap.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

Machine Type: Computerized sewing machine
Stitch Patterns: 150 built-in stitches including utility, decorative, and quilting
Stitch Length: Adjustable 0-5mm
Stitch Width: Adjustable 0-7mm
Speed: Up to 850 stitches per minute
Needle System: HAx1 standard domestic needles
Bobbin: Class 15 transparent bobbin
Presser Feet: 8 included feet with quick-change system
Lighting: LED work light
Power Source: 120V AC, 60Hz
Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel buttons and dials. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse button, needle up/down.

Control Panel: LCD display, stitch pattern buttons, automatic buttonhole selector, speed control slider, thread cutter button.

Basic Settings: Stitch selection (turn dial or press buttons), stitch length (0-5mm), stitch width (0-7mm), needle position (left/center/right). Advanced: Mirror imaging, memory functions, automatic tension, programmable needle stop position.

Connecting Accessories

Presser Feet: Quick-change system - lift lever, remove old foot, snap on new foot. Additional Ports: USB for updates and custom stitches, auxiliary lamp connector.

Turn off machine before changing accessories.
Align presser foot with bar and lower lever to lock.
For specialized feet: Ensure correct foot for specific function (buttonhole, zipper, etc.)

Tip: Always use genuine Damascus accessories for optimal performance.

Basic Sewing Operations

Supports various fabrics from lightweight to heavy materials.

Straight stitch: Select stitch 01, adjust length as needed.
Zigzag stitch: Select stitch 02, adjust width for different applications.
Automatic buttonhole: Select buttonhole mode, place button in foot, machine sews perfect buttonhole.
Reverse stitching: Press reverse button to secure beginning and end of seams.
Thread tension: Adjust dial for balanced stitches (usually 4 for medium fabrics).
Changing presser feet: Lift lever, remove current foot, snap on desired foot.

WARNING! Never pull fabric while sewing; let feed dogs move fabric. Always use correct needle for fabric type.

Advanced Features

Automatic needle threader: Push lever down, hook thread, release lever. Memory functions: Store frequently used stitch combinations. Mirror imaging: Create symmetrical decorative stitches. Programmable needle stop: Set needle to stop in up or down position.

Care & Maintenance

Unplug before cleaning. Regular maintenance ensures optimal performance.

Daily: Brush out lint from bobbin area and feed dogs.
Weekly: Oil designated points with sewing machine oil (2-3 drops).
Monthly: Clean race hook area and check for thread buildup.
Needle replacement: Change needle after every 8 hours of sewing or for new project.

CAUTION! Use only sewing machine oil. Never use household oils. Store covered when not in use.

Regulatory Information

UL Listed: Complies with safety standards for household sewing machines. Copyright © 2025 Damascus Sewing Company; all rights reserved. For support, visit www.damascus-sewing.com or contact 1-800-555-SEWING. Made with precision engineering for professional results.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection/pedal	Check power cord; ensure pedal is plugged in; verify power switch is on.
Thread breaking	Tension/thread quality	Reduce tension; use better quality thread; check for burrs on needle.
Skipped stitches	Needle/blunt needle	Replace needle; ensure correct needle type; check threading.
Bobbin thread bunching	Bobbin threading	Re-thread bobbin following direction arrow; check bobbin case.
Uneven stitches	Tension issues	Adjust upper and bobbin tension; clean tension disks.
Machine jams	Thread buildup	Turn off, remove fabric, cut threads, clean race hook area.

Reset: Turn off machine, wait 30 seconds, restart. For computerized functions: Menu > System > Reset.

Service: 1-800-555-SEWING; www.damascus-sewing.com