Champion One Genesis 2000 Sewing Machine Instruction Manual

The Champion One Genesis 2000 is a professional-grade sewing machine featuring advanced stitching technology, automatic thread tension control, built-in stitch patterns, LCD display, automatic needle threader, drop-in bobbin system, adjustable sewing speed, and multiple presser feet options. Designed for both beginners and experienced sewers, it offers precision stitching for various fabrics and projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display panel, automatic needle threader, drop-in bobbin system, stitch selection dial, speed control slider, reverse stitch button, presser foot lever, built-in LED light.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into grounded electrical outlet.
3. Install foot pedal and position for comfortable access.
4. Install needle: Loosen needle clamp screw, insert needle with flat side facing back, tighten screw.
5. Wind bobbin: Place empty bobbin on winder, thread through tension disc, press foot pedal to wind.

WARNING! Keep fingers away from needle area during operation. Always unplug machine when not in use.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread upper thread: Follow numbered guides from spool to needle.
2. Use automatic needle threader: Push lever down and hook thread through needle eye.
3. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
4. Pull up bobbin thread: Hold upper thread, turn hand wheel toward you to bring up bobbin thread.
5. Select basic straight stitch for initial testing.
6. Practice on scrap fabric to adjust tension and stitch length.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

• Machine Type: Electronic Sewing Machine
• Stitch Patterns: 50 built-in stitches (utility, decorative, stretch)
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable 0-5mm
• Buttonholes: 6 one-step automatic buttonholes
• Needle Positions: Left, center, right adjustment
• Maximum Sewing Speed: 750 stitches per minute
• Presser Feet: 6 included (zigzag, zipper, buttonhole, etc.)
• Power Requirements: 120V AC, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.

LCD Display: Shows selected stitch number, recommended settings, and error messages.

Stitch Length: Adjust for fabric type (shorter for fine fabrics, longer for heavy fabrics). Stitch Width: Adjust zigzag and decorative stitches. Thread Tension: Automatic with manual override (0-9 scale). Needle Position: Left, center, right for precise stitching.

Stitch Selection & Patterns

Built-in stitches include straight, zigzag, stretch, decorative, and buttonhole stitches.

1. Turn stitch selection dial to choose pattern (refer to stitch chart).
2. Adjust stitch length and width as needed for selected pattern.
3. For buttonholes: Select buttonhole stitch, place fabric under foot, machine sews complete buttonhole automatically.
4. For decorative stitches: Use stabilizer for best results on lightweight fabrics.
5. For stretch stitches: Use for knit fabrics to prevent popped seams.

Tip: Always test stitch on scrap fabric before sewing project.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

1. Upper Threading: Follow numbered guides from spool pin to needle.
2. Automatic Needle Threader: Push lever down, hook thread, release lever.
3. Bobbin Winding: Place spool on pin, thread through guides, place bobbin on winder, press pedal.
4. Bobbin Insertion: Drop bobbin into case with thread unwinding counterclockwise.
5. Thread Pull-up: Hold upper thread, turn hand wheel to bring up bobbin thread.

WARNING! Always use same thread weight in bobbin and needle. Use quality thread to prevent breakage.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil moving parts as indicated in manual (use sewing machine oil only).
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing or for each new project.

CAUTION! Unplug machine before cleaning or maintenance. Never use compressed air.

Accessories Included

• All-purpose foot
• Zipper foot
• Buttonhole foot
• Blind hem foot
• Overedge foot
• Button sewing foot
• Extra needles (assorted sizes)
• Bobbin (4 extra)
• Seam ripper/Lint brush
• Screwdriver
• Instruction manual

Safety Information

Always follow safety precautions to prevent injury and machine damage.

• Disconnect power cord when changing needles, cleaning, or not in use
• Keep fingers away from moving parts and needle area
• Do not pull or push fabric - let feed dogs move fabric
• Use proper needle size and type for fabric
• Ensure work area is well-lit and ventilated
• Keep machine away from water and moisture
• Supervise children and beginners closely

Troubleshooting

Reset: Turn power off and on to reset electronic functions.

Service: 1-800-SEW-HELP; www.championonesewing.com