Brother XR1300 Sewing Machine Manual

The Brother XR1300 is a versatile computerized sewing machine featuring 130 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, adjustable sewing speed, built-in needle plate thread guide, and multiple presser feet. Powered by 120V AC, this machine is ideal for beginners and experienced sewers alike with its user-friendly design and comprehensive features. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories Included 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized stitch selection panel, Automatic needle threader, Drop-in bobbin system, LCD display, Built-in LED light, Free arm capability, Multiple presser feet.

FeatureDescription
Built-in Stitches130 stitch patterns including utility, decorative, and quilting stitches
Automatic Needle ThreaderEasy one-step needle threading
Drop-in BobbinTop-loading bobbin system with clear cover
LCD DisplayShows selected stitch, stitch length, and width settings
Adjustable Speed ControlSlider for controlling sewing speed
Built-in LED LightIlluminates sewing area
Free ArmRemovable extension table for sewing cuffs and sleeves
Automatic ButtonholeOne-step automatic buttonhole
Needle Up/DownProgrammable needle position
Presser FeetIncludes zigzag, buttonhole, zipper, and blind hem feet

Installation & Setup

Unpack and inspect contents. Place on stable surface.

  1. Remove all packaging materials and protective covers
  2. Attach power cord to machine and plug into AC outlet
  3. Install foot controller and connect to machine
  4. Attach extension table if using flatbed sewing
  5. Install needle following arrow direction
  6. Wind and insert bobbin
  7. Thread upper thread through automatic needle threader

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow setup procedure.

  1. Turn main power switch to ON position
  2. Select straight stitch using stitch selection dial
  3. Practice sewing on scrap fabric to test tension
  4. Adjust stitch length and width as needed
  5. Test automatic needle threader function
  6. Practice bobbin winding and insertion
  7. Experiment with different presser feet

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, Stitch selection dial, Stitch length adjustment, Stitch width adjustment, Reverse stitch button.

Control Panel: LCD display, Stitch pattern buttons, Auto needle threader button, Thread cutter button, Speed control slider.

Stitch Settings: Length (0-5mm), Width (0-7mm), Mirror image, Twin needle capability. Utility: Reverse stitching, Needle up/down, Automatic thread cutter, Built-in needle threader.

Stitch Selection

Choose from 130 built-in stitches including:

  1. Basic Stitches: Straight, zigzag, stretch stitches
  2. Decorative Stitches: Scallops, waves, leaves, flowers
  3. Quilting Stitches: Stippling, decorative quilting patterns
  4. Buttonholes: One-step automatic buttonhole
  5. Blind Hem: For invisible hemming
  6. Overcasting: For seam finishing
  7. Elastic Stitches: For knit fabrics

Tip: Always test stitch on scrap fabric before sewing your project.

Threading & Bobbin

Automatic needle threader and drop-in bobbin system.

  1. Upper Threading: Follow numbered guide on machine
  2. Automatic Needle Threader: Push lever down and hook thread
  3. Bobbin Winding: Place thread on spool pin and wind bobbin
  4. Bobbin Insertion: Drop bobbin into case with thread clockwise
  5. Thread Drawing: Pull bobbin thread up through needle plate
  6. Tension Adjustment: Adjust upper tension dial as needed

WARNING! Ensure presser foot is raised when threading. Always use same thread type in bobbin and needle.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

  1. Clean lint from bobbin area after each project
  2. Oil machine according to maintenance schedule
  3. Wipe exterior with soft, dry cloth
  4. Replace needle regularly (every 8-10 hours of sewing)
  5. Check and clean feed dogs
  6. Inspect power cord for damage

CAUTION! Use only Brother recommended oil. Do not use compressed air for cleaning.

Accessories Included

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Brother Industries, Ltd. All rights reserved. For technical support, visit www.brother-usa.com or contact 1-877-467-4289. Made in Vietnam.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot controller is connected; check power switch.
Thread breakingTension/thread qualityRe-thread machine; adjust tension; use quality thread; check needle.
Uneven stitchesThreading/tensionRe-thread upper and bobbin; clean race area; adjust tension.
Fabric not feedingFeed dogs/ presser footCheck feed dog position; ensure presser foot is down; clean feed dogs.
Needle breaksInstallation/fabricCheck needle installation; use correct needle for fabric; don't pull fabric.
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure correct insertion; check bobbin case.
Skip stitchesNeedle/threadReplace needle; use correct needle type; check threading.

Reset: Turn machine off and on to reset computer functions.

Service: 1-877-467-4289; www.brother-usa.com

Brother XR1300 Sewing Machine Manual © - All Rights Reserved 2025