Brother XL 6562 Sewing Machine Manual

The Brother XL 6562 is a versatile computerized sewing machine featuring 70 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, adjustable sewing speed, built-in needle plate thread guide, free arm capability, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Basic Sewing Operations 8. Maintenance & Cleaning 9. Accessories Included 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop-in bobbin system, free arm, LCD display, stitch selection dial, and multiple presser feet.

FeatureDescription
Built-in Stitches70 stitches including utility, decorative, and quilting stitches
Automatic Needle ThreaderEasy needle threading with push-pull mechanism
Drop-in Bobbin SystemTop-loading bobbin with clear cover
LCD DisplayShows selected stitch and settings
Free ArmRemovable extension table for sewing cuffs and sleeves
Adjustable Speed ControlSlider for controlling sewing speed
Automatic Thread CutterBuilt-in thread cutting button
Needle Up/Down FunctionProgrammable needle position
Presser FeetIncludes zigzag, zipper, buttonhole, and blind hem feet
Stitch Length/WidthAdjustable stitch dimensions

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

  1. Remove packaging materials and protective covers from machine.
  2. Attach power cord to machine and plug into electrical outlet.
  3. Install foot controller: Connect to machine port near power cord.
  4. Set up extension table: Attach to free arm when needed.
  5. Install needle: Loosen needle clamp screw, insert needle with flat side to back.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Power on machine; follow setup procedures.

  1. Thread machine: Follow threading path marked on machine.
  2. Wind bobbin: Place thread on spool pin, follow bobbin winding instructions.
  3. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
  4. Select stitch: Turn stitch selection dial to desired pattern.
  5. Test sew: Use scrap fabric to test stitch and tension settings.

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

Controls and Settings

Access functions via control panel and stitch selection dial.

Control Panel: Power switch, stitch selection dial, LCD display, reverse stitch button, automatic thread cutter, needle up/down button.

Stitch Settings: Select stitch pattern with dial, adjust stitch length (0-5mm), adjust stitch width (0-7mm). Utility Functions: Reverse sewing, thread tension control (0-9), presser foot pressure adjustment. Display: LCD shows stitch number, recommended foot, and stitch settings.

Stitch Selection

70 built-in stitches organized by function:

  1. Utility Stitches: Straight, zigzag, stretch, overcast
  2. Decorative Stitches: Scallop, honeycomb, smocking
  3. Quilting Stitches: Decorative patterns for quilting
  4. Buttonhole: One-step automatic buttonhole
  5. Blind Hem: For invisible hemming

Tip: Refer to stitch chart for recommended applications and settings.

Basic Sewing Operations

Step-by-step sewing procedures:

  1. Raise presser foot and position fabric under foot.
  2. Lower presser foot lever gently.
  3. Press foot controller to start sewing.
  4. Guide fabric gently without pulling or pushing.
  5. Use reverse stitch button to secure beginning and end.
  6. Press automatic thread cutter or raise needle and cut threads manually.
  7. For free arm sewing: Remove extension table for cylindrical items.

WARNING! Never place fingers near moving needle. Always watch needle area during sewing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean lint from bobbin area after each project.
  2. Oil machine as directed in maintenance section (use only sewing machine oil).
  3. Wipe exterior with soft, dry cloth.
  4. Replace needle regularly (after 8-10 hours of sewing).
  5. Store machine with cover when not in use.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories Included

AccessoryQuantityPurpose
Zigzag Foot1General sewing
Zipper Foot1Zipper installation
Buttonhole Foot1Automatic buttonholes
Blind Hem Foot1Invisible hemming
Button Sewing Foot1Sewing on buttons
Overcasting Foot1Preventing fabric fraying
Bobbin (Class 15)4Extra bobbins
NeedlesAssortedVarious sizes
Screwdriver1Needle replacement
Seam Ripper1Removing stitches

Safety Information

Important safety precautions for operation:

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower connectionCheck power cord; ensure machine is turned on
Thread breakingTension/thread qualityReduce tension; use better quality thread
Uneven stitchesThreading/tensionRe-thread machine; adjust tension settings
Needle breakingBent needle/fabric pullReplace needle; don't pull fabric while sewing
Bobbin thread issuesBobbin winding/insertionRewind bobbin; ensure proper insertion
Fabric not feedingPresser foot pressureAdjust presser foot pressure; clean feed dogs
Unusual noiseLint buildupClean bobbin area and feed dogs
Buttonhole not formingFoot attachmentEnsure buttonhole foot is properly attached

Service: 1-877-467-4289; www.brother-usa.com

Brother XL 6562 Sewing Machine Manual © - All Rights Reserved 2025