Brother Sewing Machine SC6600 Manual

The Brother SC6600 is a versatile computerized sewing machine featuring 60 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, adjustable sewing speed, built-in needle plate thread guide, and one-step buttonhole. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Threading & Bobbin 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop-in bobbin system, LCD display, built-in stitches, free arm capability.

FeatureDescription
Built-in Stitches60 utility, decorative, and stretch stitches
Automatic Needle ThreaderEasy threading with push-pull mechanism
Drop-in Bobbin SystemTop-loading bobbin with clear cover
LCD DisplayShows selected stitch and settings
One-step ButtonholeAutomatic buttonhole sizing
Free ArmFor sewing cuffs and sleeves
Adjustable Speed ControlSlider for sewing speed adjustment
Stitch Length/WidthAdjustable for customization
Needle PositionUp/down needle position button
Presser FeetIncludes multiple feet for different functions

Installation & Setup

Unpack and inspect all contents. Place on stable sewing table.

  1. Remove packaging materials and protective covers
  2. Install foot controller: Plug into machine port
  3. Connect power: Plug power cord into machine and electrical outlet
  4. Install needle: Loosen needle clamp screw, insert needle with flat side to back
  5. Wind bobbin: Follow bobbin winding instructions

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow setup procedure.

  1. Thread machine: Follow threading path indicated on machine
  2. Insert bobbin: Place bobbin in case with thread pulling counterclockwise
  3. Select stitch: Use stitch selection dial or buttons
  4. Adjust settings: Set stitch length and width as needed
  5. Test sew: Use scrap fabric to test stitch quality

CAUTION! Always start with needle in highest position. Keep work area well-lit.

Specifications

Controls and Functions

Access functions via control panel and dials. Main Controls: Power switch, stitch selection dial, stitch width/length buttons, reverse stitch button, needle position button.

LCD Display: Shows selected stitch number, recommended foot, stitch settings. Stitch Selection: Turn dial to choose from 60 stitches. Speed Control: Slider for slow to fast sewing. Reverse: Button for reinforcement stitching.

Settings: Stitch length (0-5mm), stitch width (0-7mm), needle position (up/down).

Stitch Selection

Choose from 60 built-in stitches including utility, decorative, and stretch stitches.

  1. Turn stitch selection dial to desired stitch number
  2. Check LCD display for stitch confirmation
  3. Select appropriate presser foot for chosen stitch
  4. Adjust stitch length and width as needed
  5. Test stitch on scrap fabric before sewing project

Tip: Refer to stitch chart for recommended uses and settings.

Threading & Bobbin

Proper threading ensures smooth operation and quality stitches.

  1. Raise presser foot and needle to highest position
  2. Follow numbered threading path on machine
  3. Use automatic needle threader: Push lever down and pull thread through
  4. Wind bobbin: Place thread on spool pin, wind following guide arrows
  5. Insert bobbin: Drop into case with thread pulling counterclockwise
  6. Pull bobbin thread up through needle plate

WARNING! Always thread with power off. Ensure proper thread tension.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

  1. Clean lint buildup: Remove needle plate and bobbin case regularly
  2. Oil machine: Use sewing machine oil as indicated in manual
  3. Change needle: Replace after 8-10 hours of sewing or when dull
  4. Cover machine: Protect from dust when not in use

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Regulatory Information

UL Listed: Complies with safety standards for household use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289. Made for household use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower connectionCheck power cord; ensure foot controller plugged in; check power switch.
Thread breakingThreading/tensionRe-thread machine; check tension settings; use quality thread.
Skipped stitchesNeedle/threadReplace needle; ensure correct needle type; check threading.
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure proper insertion direction.
Uneven stitchesTension/threadingAdjust upper and lower tension; re-thread completely.

Reset: Turn power off and on to reset computerized functions.

Service: 1-877-467-4289; www.brother-usa.com

Brother Sewing Machine SC6600 Manual © - All Rights Reserved 2025