Brother Sewing Machine CE 5000PRW Manual

The Brother CE 5000PRW is a computerized sewing machine featuring 50 built-in stitches, automatic needle threader, drop-in bobbin system, LCD display, automatic thread cutter, and embroidery capabilities. This machine offers versatile sewing functions for both beginners and experienced sewers. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Threading and Bobbin 8. Maintenance and Care 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Computerized control panel, automatic needle threader, drop-in bobbin system, LCD display, built-in stitches, embroidery functions.

FeatureDescription
Built-in Stitches50 utility, decorative, and quilting stitches
Automatic Needle ThreaderEasy threading with push-button operation
Drop-in Bobbin SystemQuick and easy bobbin loading with clear cover
LCD DisplayShows stitch selection and settings
Automatic Thread CutterOne-touch thread cutting
Speed Control SliderAdjustable sewing speed
Buttonhole Styles6 one-step automatic buttonholes
Embroidery FunctionsBuilt-in embroidery designs and lettering
Free ArmConvertible for sewing sleeves and cuffs
Needle PositionsAdjustable needle position

Installation and Setup

Unpack and inspect all contents. Place on stable surface.

  1. Remove packaging materials and protective covers
  2. Attach power cord to machine and plug into outlet
  3. Install foot controller (if included)
  4. Set up machine on flat, stable surface
  5. Install needle and thread machine
  6. Wind and insert bobbin

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing needles.

First-Time Operation

Power on machine; follow setup procedure.

  1. Connect power cord and turn on machine
  2. Select basic straight stitch using stitch selection dial
  3. Thread machine using automatic needle threader
  4. Insert bobbin in drop-in bobbin case
  5. Practice on scrap fabric to test tension and stitch quality
  6. Adjust stitch length and width as needed

CAUTION! Always use proper needle for fabric type. Test stitches on scrap fabric first.

Specifications

Controls and Functions

Access functions via control panel and dials. Main Controls: Power switch, stitch selection dial, LCD display, reverse stitch button, automatic thread cutter.

Control Panel: Stitch selection buttons, stitch length/width adjustment, mirror image, needle up/down, speed control slider.

Stitch Settings: Length (0-5mm), width (0-7mm), tension adjustment (0-9). Special Functions: Automatic needle threader, thread cutter, bobbin winding, free arm conversion.

Stitch Selection

50 built-in stitches including straight, zigzag, stretch, decorative, and quilting stitches.

  1. Turn stitch selection dial to choose stitch category
  2. Use arrow buttons to select specific stitch
  3. Adjust stitch length and width as needed
  4. Test stitch on scrap fabric
  5. For buttonholes: Select buttonhole stitch and follow automatic procedure
  6. For embroidery: Select embroidery mode and choose design

Tip: Refer to stitch guide for recommended settings for different fabrics.

Threading and Bobbin

Automatic needle threader and drop-in bobbin system for easy operation.

  1. Raise presser foot and needle to highest position
  2. Follow threading guide printed on machine
  3. Use automatic needle threader: Lower lever and hook thread
  4. Wind bobbin: Place thread on spool pin and follow bobbin winding path
  5. Insert bobbin: Drop bobbin into case with thread clockwise
  6. Pull thread through slot and under tension spring

WARNING! Always turn off power when threading needle or changing bobbin.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

  1. Clean lint and dust from bobbin area regularly
  2. Oil machine as specified in maintenance schedule
  3. Replace needles regularly (every 8-10 hours of sewing)
  4. Use proper needles for different fabric types
  5. Store machine covered when not in use
  6. Use genuine Brother parts and accessories

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with CE 5000PRW.

AccessoryPurpose
Standard Presser FootGeneral sewing
Zigzag FootZigzag and decorative stitches
Buttonhole FootAutomatic buttonholes
Zipper FootInstalling zippers
Button Sewing FootSewing on buttons
Quilting FootQuilting projects
Embroidery FootEmbroidery work
Additional BobbinsExtra bobbins for different threads
NeedlesAssorted needles for different fabrics
ScrewdriverNeedle and foot changes

Regulatory Information

UL Listed: Complies with UL standard 1278. FCC Part 15: Class B digital device. Copyright © 2024 Brother International Corporation. All rights reserved. For technical support and service, visit www.brother-usa.com or contact 1-877-4BROTHER (1-877-426-8437).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower connectionCheck power cord; ensure machine is turned on; check foot controller connection.
Thread breakingTension/thread qualityCheck threading path; adjust tension; use quality thread; check needle.
Uneven stitchesThreading/tensionRe-thread machine; check bobbin; adjust tension settings.
Needle breakingNeedle/fabric mismatchUse proper needle type; check for bent needle; don't pull fabric.
Bobbin issuesWinding/insertionRewind bobbin evenly; ensure proper insertion; check for lint.
Fabric not feedingPresser foot/feed dogsLower presser foot; check feed dog position; clean feed dogs.

Reset: Turn machine off and on to reset computer functions.

Service: 1-877-4BROTHER; www.brother-usa.com

Brother Sewing Machine CE 5000PRW Manual © - All Rights Reserved 2025