Brother 6000i Sewing Machine Manual

The Brother 6000i is a versatile computerized sewing machine featuring 60 built-in stitches, automatic needle threader, LCD display, drop-in bobbin system, adjustable stitch length and width, automatic buttonholer, free arm capability, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: LCD display, automatic needle threader, bobbin winding system, stitch selection dial, speed control slider, reverse stitch button, free arm convertible design.

Installation & Setup

Unpack and inspect all components. Place on stable, flat surface.

1. Remove packaging materials and protective covers from machine.
2. Attach power cord to machine and plug into electrical outlet.
3. Install foot controller: Connect to machine port near power input.
4. Attach extension table: Slide into position until it clicks.
5. Install needle: Loosen needle clamp screw, insert needle with flat side toward back.
6. Wind bobbin: Place empty bobbin on winder, thread through tension disc.

WARNING! Keep fingers away from needle area during operation. Always turn off power when threading or changing accessories.

First-Time Operation

Power on machine; follow setup procedure.

1. Thread machine: Follow threading guide printed on machine.
2. Insert bobbin: Place wound bobbin in bobbin case with thread pulling counterclockwise.
3. Select stitch: Turn stitch selection dial to desired pattern.
4. Adjust settings: Set stitch length and width as needed.
5. Test sew: Use scrap fabric to test stitch quality and tension.
6. Practice basic stitches: Begin with straight stitch and zigzag.

CAUTION! Always use proper needle for fabric type. Replace bent or dull needles immediately.

Specifications

• Stitches: 60 built-in stitches including 7 auto-size buttonholes
• Stitch Length: Adjustable up to 5mm
• Stitch Width: Adjustable up to 7mm
• Needle Positions: Left, center, right
• Bobbin: Class 15 transparent bobbin
• Presser Feet: 6 included standard feet
• Lighting: Built-in LED work light
• Power Source: 110-120V AC, 60Hz
• Dimensions: 15.7" x 7.1" x 12.2"
• Weight: 12.3 lbs

Controls and Settings

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse button, needle up/down button.

LCD Display: Shows selected stitch number, recommended presser foot, stitch length/width settings, error messages.

Stitch Selection: Turn dial to choose from 60 stitches. Stitch Length: 0-5mm adjustment. Stitch Width: 0-7mm adjustment. Speed Control: Slider for slow to fast sewing speed. Reverse Stitch: Button for reinforcing stitches. Needle Position: Button for setting needle stop position.

Stitch Selection

Machine offers utility, decorative, and stretch stitches.

1. Basic Stitches: Straight stitch (1-3), zigzag (4), blind hem (5)
2. Decorative Stitches: Scallop, honeycomb, smocking patterns (6-35)
3. Stretch Stitches: Multiple zigzag, overlook-type stitches (36-45)
4. Buttonholes: 7 one-step automatic buttonholes (46-52)
5. Alphabet: Basic monogramming stitches (53-60)

Tip: Refer to stitch chart in manual for recommended settings and applications.

Advanced Functions

Automatic Needle Threader: Pull down lever, hook thread through guide, release lever.

1. Buttonhole Making: Select buttonhole stitch, place button in holder, machine sews perfect buttonhole.
2. Free Arm Conversion: Remove extension table for sewing sleeves and cuffs.
3. Needle Up/Down: Set needle to stop in up or down position.
4. Twin Needle: Install twin needle for parallel stitching (max width 3.5mm).
5. Mirror Imaging: Create mirror image of selected decorative stitches.

WARNING! Do not use bent needles. Always disconnect power when changing needles or presser feet.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Remove lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs and thread path.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Included standard accessories:

• All-purpose foot
• Zipper foot
• Buttonhole foot
• Blind stitch foot
• Button sewing foot
• Overcasting foot
• Additional bobbins
• Needles (assorted types)
• Seam ripper/lint brush
• Screwdriver

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device. Copyright © Brother Industries, Ltd. For technical support, visit www.brother-usa.com or contact 1-877-467-4289. Warranty: 25-year limited warranty. Made in Vietnam.

Troubleshooting

Reset: Turn machine off and on to reset computer functions.

Service: 1-877-467-4289; www.brother-usa.com