Brother 2010 Sewing Machine Manual

The Brother 2010 is a versatile computerized sewing machine with built-in stitches, automatic needle threading, drop-in bobbin system, LCD display, speed control slider, and multiple presser feet. Features include straight stitch, zigzag, decorative stitches, buttonhole functions, free arm capability, and reverse sewing. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Safety Information 11. Troubleshooting

Features at a Glance

Key components: Computerized LCD display, automatic needle threader, drop-in bobbin system, built-in stitches, free arm, accessory storage.

Feature	Description
Built-in stitches	30 built-in utility and decorative stitches
Automatic needle threader	Easy threading with push-button mechanism
Drop-in bobbin	Top-loading bobbin system with clear cover
LCD display	Shows selected stitch and settings
Free arm	Removable extension table for cylindrical sewing
Speed control slider	Adjustable sewing speed
Buttonhole function	One-step automatic buttonholes
Reverse sewing	Reinforce seams with reverse stitch button
Presser feet	Multiple included feet for different techniques
Thread tension	Adjustable upper thread tension

Installation & Setup

Unpack and inspect contents. Place on stable surface.

Remove packaging materials and protective covers
Attach power cord to machine and wall outlet
Install foot controller (if included)
Set up extension table and accessory compartment
Install needle and thread machine for first use

WARNING! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow numbered threading guide on machine
Wind bobbin: Use built-in bobbin winder
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise
Select stitch: Use stitch selection dial or buttons
Test sew: Use scrap fabric to test stitch and tension

CAUTION! Always use proper needle for fabric type. Replace bent or damaged needles immediately.

Specifications

Stitches: 30 built-in stitches including utility and decorative
Stitch Width: Up to 7mm maximum
Stitch Length: Up to 5mm maximum
Buttonholes: One-step automatic buttonhole
Needle System: HA-1 standard domestic needles
Bobbin: Class 15 transparent bobbin
Presser Feet: Multiple included: zigzag, zipper, buttonhole, button sewing
Power Source: 120V AC, 60Hz
Dimensions: Standard sewing machine size with free arm capability

Controls and Functions

Access functions via control panel and dials. Front Panel: Power switch, stitch selection dial, stitch width/length controls, reverse button.

LCD Display: Shows selected stitch number, recommended presser foot, stitch settings.

Stitch Selection: Turn dial to select from 30 built-in stitches. Stitch Width: Adjust zigzag and decorative stitch width. Stitch Length: Adjust stitch length for different fabrics. Reverse: Hold button for reverse sewing. Needle Position: Manual needle up/down control.

Stitch Selection

30 built-in stitches including straight, zigzag, stretch, and decorative patterns.

Straight Stitch: Basic sewing (stitch 1)
Zigzag Stitch: Overcasting and decorative work
Blind Hem: Nearly invisible hems
Elastic Stretch: For knit fabrics
Decorative: Multiple decorative patterns
Buttonhole: One-step automatic buttonhole

Tip: Refer to stitch guide chart for recommended uses and settings.

Threading & Bobbin

Proper threading ensures smooth operation.

Raise presser foot and needle to highest position
Follow numbered threading path on machine
Use automatic needle threader for easy threading
Wind bobbin using built-in bobbin winder
Insert bobbin with thread pulling counterclockwise
Pull bobbin thread up through needle plate

WARNING! Always thread with presser foot raised and power off when possible.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint from bobbin area after each project
Oil machine as indicated in manual (if required)
Replace needles regularly (every 8-10 hours of sewing)
Clean exterior with soft, dry cloth
Store covered when not in use

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories

Standard accessories included with Brother 2010.

Zigzag Foot (on machine)
Zipper Foot
Buttonhole Foot
Button Sewing Foot
Bobbin (several included)
Needles (assorted sizes)
Screwdriver
Seam Ripper/Lint Brush
Instruction Manual

Safety Information

Important safety precautions for sewing machine operation.

Always disconnect power when changing needles, cleaning, or not in use
Keep fingers away from moving needle
Do not sew over pins - remove before needle reaches them
Use proper ventilation when sewing for extended periods
Keep machine away from water and moisture
Supervise children and beginners closely

Troubleshooting

Symptom	Possible Cause	Corrective Action
Thread breaking	Incorrect threading/tension	Re-thread completely; adjust tension; check for burrs on needle
Skip stitches	Wrong needle/damaged needle	Replace needle; ensure correct needle for fabric type
Bobbin thread bunching	Incorrect bobbin threading	Re-thread bobbin; ensure bobbin inserted correctly
Machine not running	Power/pedal issues	Check power connection; ensure foot controller plugged in
Uneven stitches	Tension issues	Adjust upper tension; check bobbin tension
Needle breaking	Bent needle/wrong installation	Replace needle; ensure needle inserted fully and straight

Service: Contact authorized Brother service center for repairs.

Support: 1-877-467-4289; www.brother-usa.com