Black Singer Sewing Machine Manual

The Black Singer Sewing Machine is a versatile household sewing machine designed for various fabric types, featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, automatic bobbin winding, free arm capability, LED lighting, and easy threading system. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection Guide 7. Threading and Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Metal frame construction, built-in stitch patterns, automatic needle threader, drop-in bobbin system, free arm, LED work light, foot pedal control.

FeatureDescription
Built-in Stitches23 built-in stitches including straight, zigzag, decorative
Automatic Needle ThreaderEasy one-step needle threading
Drop-in BobbinTop-loading bobbin with clear cover
Free ArmRemovable extension table for cylindrical sewing
LED Work LightBright illumination of sewing area
Stitch Length/WidthAdjustable stitch length and width controls
Reverse StitchButton for reinforcing stitches
Foot PedalVariable speed control
Power SwitchMain power on/off control
Presser FeetMultiple included presser feet for different tasks

Unpacking and Setup

Unpack and inspect all contents. Place on stable, level surface.

  1. Remove machine from packaging: Lift machine by base, not handwheel.
  2. Attach power cord: Plug into machine and wall outlet.
  3. Install foot pedal: Connect to machine port.
  4. Attach extension table: Snap into place for flat sewing surface.
  5. Insert needle: Ensure flat side faces back, tighten screw.

WARNING! Machine is heavy; lift with care using both hands. Keep fingers away from needle area during operation.

First-Time Operation

Power on machine; follow setup procedures.

  1. Thread machine: Follow numbered threading guide on machine.
  2. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
  3. Insert bobbin: Drop bobbin into case, pull thread through slot.
  4. Select stitch: Turn stitch selection dial to desired pattern.
  5. Test sew: Use scrap fabric to test stitch quality and tension.

CAUTION! Always turn power off when changing needles or performing maintenance.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, power switch.

Stitch Selection: Turn dial to select from 23 built-in stitches. Stitch Length: Adjust from 0-4mm for stitch density. Stitch Width: Adjust from 0-5mm for zigzag and decorative stitches. Reverse: Hold button for backstitching. Tension: Adjust thread tension dial (4-6 for normal sewing).

Stitch Selection Guide

Choose appropriate stitch for your fabric and project.

  1. Straight Stitch: Basic sewing, topstitching (position 1)
  2. Zigzag Stitch: Seam finishing, appliqué (position 2-5)
  3. Blind Hem: Nearly invisible hems (position 6)
  4. Stretch Stitch: Knits and stretch fabrics (position 7-9)
  5. Decorative Stitches: Embellishment (position 10-23)
  6. Buttonhole: Automatic 4-step buttonhole (position 24)

Tip: Test stitch on fabric scrap before starting project.

Threading and Bobbin

Proper threading ensures smooth operation.

  1. Raise presser foot and needle to highest position.
  2. Follow numbered threading path from spool to needle.
  3. Use automatic needle threader: Push lever down and hook thread.
  4. Wind bobbin: Place spool on pin, thread through guide, wind until full.
  5. Insert bobbin: Drop in case, pull thread through slot, under tension spring.
  6. Pull up bobbin thread: Hold needle thread, turn handwheel toward you.

WARNING! Always power off machine when threading needle or bobbin area.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean lint: Remove needle plate and bobbin case, brush out lint.
  2. Oil machine: Apply sewing machine oil to moving parts as directed.
  3. Change needle: Replace needle after 8-10 hours of sewing.
  4. Check belt: Ensure drive belt is properly tensioned.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Accessories

Included accessories for various sewing tasks.

AccessoryPurpose
All-Purpose FootGeneral sewing
Zipper FootInstalling zippers
Buttonhole FootCreating buttonholes
Blind Hem FootInvisible hemming
Seam RipperRemoving stitches
NeedlesAssorted sizes
BobbinsExtra Class 15 bobbins
BrushLint cleaning
ScrewdriverNeedle plate removal

Regulatory Information

UL Listed: Certified for household use. Copyright © 2025 Singer Manufacturing Company. All rights reserved. For technical support, visit www.singer.com or contact 1-800-4-SINGER. Made for household use only. Not intended for commercial applications.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRethread completely; adjust tension; check for burrs on needle.
Skipped stitchesWrong needle/dull needleReplace needle; ensure correct needle for fabric type.
Bobbin thread bunchingIncorrect bobbin threadingRemove and rethread bobbin; check bobbin case.
Machine not feedingPresser foot pressureClean feed dogs; check presser foot pressure setting.
Noisy operationLint buildup/lack of oilClean and oil machine; check for loose parts.
Needle breaksWrong needle size/bent needleUse correct needle size; ensure needle is properly inserted.

Service: 1-800-4-SINGER; www.singer.com

Black Singer Sewing Machine Manual © - All Rights Reserved 2025