bicor vx1005 sewing machine manual free

The Bicor VX1005 is a versatile electronic sewing machine featuring 100 built-in stitches, automatic needle threader, one-step buttonhole, drop feed for free-motion sewing, adjustable stitch length and width, built-in LED light, free arm capability, and multiple presser feet. Powered by standard household electricity with foot pedal speed control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic stitch selection panel, automatic needle threader, free arm, LED work light, bobbin winder, stitch length/width controls, reverse stitch button.

Unpacking and Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Attach power cord: Plug into machine and wall outlet.
3. Install foot pedal: Connect to machine port and place on floor.
4. Attach extension table: Snap into place for flatbed sewing.
5. Thread machine: Follow threading diagram on machine.

WARNING! Machine is heavy; lift with both hands. Keep fingers away from needle area during setup.

First-Time Operation

Power on machine; test basic functions.

1. Thread machine: Use automatic needle threader for upper thread.
2. Wind bobbin: Place empty bobbin on winder and thread according to diagram.
3. Insert bobbin: Drop-in bobbin system with clear cover.
4. Select stitch: Choose basic straight stitch for testing.
5. Test sew: Use scrap fabric to practice speed control.
6. Adjust tension: Start with default setting (4-5) and adjust as needed.

CAUTION! Always turn off power when changing needles or cleaning.

Specifications

• Stitches: 100 built-in stitches
• Buttonholes: One-step automatic
• Stitch Length: 0-4mm adjustable
• Stitch Width: 0-5mm adjustable
• Needle Positions: Left, center, right
• Max Sewing Speed: 800 stitches per minute
• Work Light: LED illumination
• Power Supply: 110V, 60Hz (standard household)
• Machine Weight: 15.4 lbs (7 kg)
• Warranty: 25-year limited warranty

Controls and Functions

Access functions via stitch selection panel and control buttons. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse button.

Stitch Panel: Stitch patterns 1-100, straight stitch, zigzag, stretch stitches, decorative patterns, buttonhole symbol.

Basic Controls: Stitch length dial (0-4mm), stitch width dial (0-5mm), reverse stitch button, bobbin winder, handwheel, presser foot lever, thread tension dial. Electronic: Power switch, LED light switch, automatic needle threader lever.

Stitch Selection

Choose from 100 built-in stitches for various fabrics and projects.

1. Turn stitch selection dial to desired pattern number.
2. Consult stitch chart for recommended fabric types.
3. Adjust stitch length for fabric weight (longer for heavy fabrics).
4. Adjust stitch width for decorative effects.
5. Test stitch on fabric scrap before starting project.

Tip: Use stretch stitches for knit fabrics, straight stitch for wovens.

Basic Sewing Techniques

Master fundamental sewing operations.

1. Straight stitching: Use stitch 1, adjust length as needed.
2. Zigzag stitching: Use for finishing edges and stretch fabrics.
3. Buttonholes: Select buttonhole stitch, place button in foot, machine does rest.
4. Reverse stitching: Hold reverse button to reinforce seam ends.
5. Free-motion sewing: Drop feed dogs for quilting and embroidery.
6. Gathering: Use longer stitch length and pull bobbin thread.

WARNING! Always keep fingers away from moving needle. Use seam guide for straight seams.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil hook race and moving parts (use sewing machine oil only).
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended oils.

Accessories Included

Standard accessories provided with Bicor VX1005.

Safety Information

FCC compliant electronic device. Always follow safety guidelines:

• Disconnect power when not in use or during maintenance
• Keep fingers away from moving needle
• Use proper needle for fabric type
• Do not operate with damaged power cord
• Keep work area well-lit and organized
• Store out of reach of children

For support, visit www.bicorsewing.com or contact 1-800-555-SEWING.

Troubleshooting

Reset: Turn power off and on to reset electronic functions.

Service: 1-800-555-SEWING; www.bicorsewing.com