Bernina Sewing Machine 330 Manual

The Bernina Sewing Machine 330 is a high-quality electronic sewing machine featuring advanced stitch patterns, automatic needle threader, built-in LED lighting, adjustable stitch length and width, free arm capability, multiple presser feet options, computerized controls, speed regulator, reverse stitch function, and bobbin winding system. Designed for precision sewing with professional results. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Technical Specifications 5. Controls and Functions 6. Stitch Selection Guide 7. Threading and Bobbin 8. Presser Feet Guide 9. Maintenance & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Electronic stitch selection panel, Automatic needle threader, LED work area lighting, Free arm conversion, Bobbin winding system, Speed control slider, Reverse stitch button.

FeatureDescription
Stitch patternsOver 100 built-in stitches including utility, decorative, and buttonholes
Automatic needle threaderEasy threading with push-button mechanism
LED lightingBright illumination of sewing area
Free armConvertible for sewing sleeves and cuffs
Speed controlAdjustable sewing speed from slow to fast
Reverse stitchReinforce seams with single button press
Bobbin systemTop-loading with clear cover
Stitch length/widthElectronic adjustment for precision
Presser feetMultiple specialized feet included
Power requirementsStandard household electrical outlet

Unpacking and Setup

Carefully unpack all components and place on stable surface.

  1. Remove machine from packaging: Lift from carrying case, remove protective materials.
  2. Set up workspace: Ensure adequate lighting and space for fabric movement.
  3. Connect foot control: Plug into machine and power outlet.
  4. Install needle: Loosen needle clamp, insert needle with flat side to back.
  5. Connect power: Plug machine into electrical outlet.

WARNING! Machine is heavy; lift with both hands. Keep fingers away from needle area during setup.

First-Time Operation

Power on machine; follow initial setup procedures.

  1. Thread machine: Follow numbered threading path on machine.
  2. Wind bobbin: Place empty bobbin on winder, thread through tension disc.
  3. Insert bobbin: Drop bobbin into case with thread moving counterclockwise.
  4. Select basic stitch: Choose straight stitch for initial testing.
  5. Test on scrap fabric: Practice stitching on fabric remnant.

CAUTION! Always turn off power when changing needles or performing maintenance.

Technical Specifications

Controls and Functions

Access functions via control panel and manual dials. Front Panel: Power switch, Stitch selection buttons, Stitch length/width controls, Reverse stitch button, Needle up/down button.

Display: LCD screen showing stitch selection, settings, and error messages.

Stitch Selection: Utility stitches (straight, zigzag), Decorative stitches, Buttonhole patterns. Adjustments: Stitch length (0-5mm), Stitch width (0-7mm), Tension control (0-9). Functions: Automatic needle threader, Thread cutter, Speed control slider, Memory function for favorite stitches.

Stitch Selection Guide

Utility stitches: Straight stitch (000), Zigzag stitch (001), Blind hem stitch (005), Stretch stitches (010-015). Decorative stitches: Scallop, Diamond, Heart, Flower patterns (050-099). Buttonholes: Standard (030), Stretch (031), Keyhole (032), Round-end (033).

  1. Select stitch category using mode button.
  2. Choose specific stitch number using arrow keys.
  3. Adjust length and width as needed for fabric.
  4. Test stitch on fabric scrap before starting project.

Tip: Refer to stitch chart in manual for recommended settings by fabric type.

Threading and Bobbin

Upper threading: Follow numbered path from spool pin to needle.

  1. Raise presser foot and needle to highest position.
  2. Place thread spool on pin, secure with cap.
  3. Follow threading guide: Through tension discs, take-up lever, down to needle.
  4. Use automatic needle threader: Push lever down, hook thread, release.
  5. Bobbin winding: Place empty bobbin on winder, engage mechanism, press foot control.
  6. Bobbin insertion: Open cover, drop bobbin with thread moving counterclockwise.

WARNING! Always disconnect power when threading bobbin area.

Presser Feet Guide

Standard foot: For straight and zigzag stitching. Zipper foot: For installing zippers. Buttonhole foot: For automatic buttonholes. Blind hem foot: For invisible hemming. Overcasting foot: For finishing fabric edges. Embroidery foot: For decorative stitching.

Maintenance & Cleaning

Unplug machine before cleaning. Remove lint from bobbin area and feed dogs regularly. Oil moving parts as specified in maintenance schedule.

CAUTION! Use only Bernina-approved oil and cleaning tools. Never spray cleaners directly on machine.

Warranty Information

Limited warranty: 20 years on mechanical parts, 2 years on electronic components. Registration required within 30 days of purchase. For service, contact authorized Bernina dealer or visit www.bernina.com. Customer support: 1-800-405-2569.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower connectionCheck power cord; ensure foot control is plugged in; verify outlet works.
Thread breakingTension/needle issuesRethread machine; check needle for damage; adjust tension settings.
Uneven stitchesThreading/bobbinRethread upper and lower threads; clean bobbin area; check needle insertion.
Fabric not feedingPresser foot/feed dogsLower presser foot; clean feed dogs; check stitch length setting.
Needle threader not workingPosition/thread sizeEnsure needle is in highest position; use appropriate thread weight.

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-405-2569; www.bernina.com

Bernina Sewing Machine 330 Manual © - All Rights Reserved 2025