The Bernette 705 is a versatile electronic sewing machine with 70 built-in stitches, automatic needle threader, one-step buttonhole, drop feed for free-motion sewing, adjustable stitch length and width, built-in LED lighting, speed control slider, and easy stitch selection. Powered by standard household outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Electronic stitch selection panel, automatic needle threader, drop-in bobbin system, built-in LED light, free arm, accessory storage.
| Feature | Description |
|---|---|
| Built-in stitches | 70 stitches including utility, decorative, and stretch |
| Automatic needle threader | Easy threading with push-pull mechanism |
| One-step buttonhole | Automatic buttonhole sizing and stitching |
| Drop feed | Lower feed dogs for free-motion sewing |
| Stitch length/width | Adjustable settings for customization |
| Speed control slider | Variable sewing speed adjustment |
| Built-in LED light | Bright illumination of sewing area |
| Free arm | Removable extension table for cylindrical sewing |
| Reverse stitch | Button for reinforcing stitches |
| Bobbin warning | Indicator when bobbin thread is low |
Unpack and inspect all components. Place on stable, level surface.
WARNING! Keep fingers away from needle area during operation. Always turn off when not in use.
Power on machine; familiarize with basic controls.
CAUTION! Always use correct needle for fabric type. Change needle regularly.
Front Panel: Power switch, stitch selection dial, stitch length dial, stitch width dial, reverse stitch button.
Additional Features: Automatic needle threader, thread cutter, presser foot pressure adjustment, drop feed lever, free arm conversion.
Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter/longer stitches. Stitch Width: Adjust for wider/narrower zigzag. Reverse: Hold button for backstitching. Needle Position: Manual adjustment for precise placement.
70 built-in stitches organized by category:
Tip: Refer to stitch chart for recommended uses and settings.
Essential sewing operations and procedures.
WARNING! Always use appropriate presser foot for each technique.
Regular maintenance ensures optimal performance.
CAUTION! Unplug machine before cleaning or maintenance.
Standard included accessories:
| Accessory | Purpose |
|---|---|
| All-purpose foot | General sewing |
| Zipper foot | Zipper installation |
| Buttonhole foot | Automatic buttonholes |
| Blind hem foot | Invisible hemming |
| Overedge foot | Edge finishing |
| Bobbin (x4) | Thread holding |
| Needles (assorted) | Different fabric types |
| Seam ripper | Stitch removal |
| Brush | Lint cleaning |
Important safety precautions for operation.
WARNING! Never operate with damaged power cord or while wet.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power connection | Check power cord; ensure switch is on; test outlet |
| Thread breaking | Tension/needle | Check threading; adjust tension; replace needle |
| Uneven stitches | Threading/tension | Re-thread completely; clean bobbin area; adjust tension |
| Fabric not feeding | Feed dogs | Ensure feed dogs are raised; check presser foot pressure |
| Needle breaking | Fabric/technique | Use correct needle type; don't pull fabric; check for bent needle |
| Poor buttonholes | Stabilizer/foot | Use stabilizer; ensure proper foot attachment; check stitch width |
Service: Contact authorized Bernette service center for repairs.
Support: www.bernette.com or customer service hotline