Bernette 60 Sewing Machine Manual

The Bernette 60 is a versatile electronic sewing machine with 60 built-in stitches, automatic needle threader, one-step buttonhole, adjustable stitch length and width, free arm capability, built-in LED lighting, drop feed for free-motion sewing, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, automatic needle threader, free arm, built-in stitches, LED work light, accessory compartment.

Installation & Setup

Unpack and inspect all contents. Place on stable, level surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot control: Plug into machine's foot control port.
3. Connect power: Plug power cord into machine and electrical outlet.
4. Install needle: Ensure flat side faces back, tighten screw securely.
5. Wind bobbin: Follow bobbin winding instructions in manual.
6. Thread machine: Use automatic needle threader for easy threading.

WARNING! Machine is heavy; lift with care. Ensure stable surface before operation.

First-Time Operation

Power on machine; familiarize yourself with controls.

1. Select straight stitch: Turn stitch selection dial to position 1.
2. Practice on scrap fabric: Use medium weight cotton for initial testing.
3. Adjust stitch length: Start with 2.5mm for general sewing.
4. Test reverse stitching: Practice reinforcing seam beginnings and ends.
5. Experiment with speed: Use speed control slider to find comfortable pace.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

• Stitches: 60 built-in stitches including utility, decorative, and stretch
• Buttonholes: One-step automatic buttonhole
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable up to 5mm
• Needle System: HAx1 domestic needles
• Bobbin: Class 15 transparent bobbin
• Maximum Sewing Speed: 800 stitches per minute
• Work Space: Free arm with removable extension table
• Lighting: Built-in LED work light
• Power Requirements: Standard household electrical outlet
• Dimensions: Standard sewing machine size with carrying case

Controls and Settings

Electronic control panel with stitch selection dial, function buttons, and LCD display.

Main Controls: Power switch, stitch selection dial, stitch length adjustment, stitch width adjustment, reverse stitch button, automatic needle threader, thread cutter.

Stitch Settings: Straight stitch (1), zigzag stitch (2), stretch stitches (3-10), decorative stitches (11-60). Function Buttons: Start/stop (for machines with this feature), needle up/down, speed control slider. Display: Shows selected stitch number and settings.

Stitch Selection

Use stitch selection dial to choose from 60 built-in stitches.

1. Turn machine off before changing stitches.
2. Rotate stitch selection dial to desired stitch number.
3. Refer to stitch chart for pattern identification.
4. Adjust stitch length and width as needed for fabric type.
5. Test stitch on scrap fabric before sewing project.

Tip: Always test stitches on fabric scrap to ensure proper tension and appearance.

Basic Sewing Techniques

Master fundamental sewing operations for optimal results.

1. Straight stitching: Use for seams, topstitching, and basting.
2. Zigzag stitching: For finishing edges, appliqué, and stretch fabrics.
3. Buttonholes: Automatic one-step buttonhole function.
4. Reverse stitching: Reinforce seam beginnings and ends.
5. Free arm sewing: Remove extension table for sleeves and cuffs.
6. Drop feed: Lower feed dogs for free-motion quilting or darning.
7. Gathering: Use longer stitch length with tight upper thread tension.

WARNING! Always use appropriate presser foot for each technique. Never force fabric through machine.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil machine according to lubrication points in manual.
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only recommended sewing machine oil.

Accessories

Standard accessories included with Bernette 60 sewing machine.

Safety Information

Important safety precautions for safe sewing machine operation.

• Always unplug machine when not in use or during maintenance
• Keep fingers away from moving needle and presser foot
• Do not operate with damaged power cord or foot control
• Use only recommended accessories and replacement parts
• Keep work area well-lit and free from obstructions
• Do not place machine on unstable surface
• Supervise children and beginners during operation
• Disconnect power before changing needles or presser feet

Troubleshooting

Service: Contact authorized Bernette service center for professional repairs. Visit www.bernette.com or contact customer service for assistance.