beldray 12 stitch sewing machine instruction manual

The Beldray 12 Stitch Sewing Machine is a versatile household sewing machine featuring 12 built-in stitches, adjustable stitch length and width, built-in buttonholer, free arm capability, reverse sewing function, built-in light, and easy threading system. Suitable for various fabrics including cotton, denim, and stretch materials. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. Machine Setup 4. Specifications 5. Controls and Functions 6. Threading the Machine 7. Stitch Selection and Settings 8. Basic Sewing Techniques 9. Maintenance and Cleaning 10. Troubleshooting

Features at a Glance

Key components: 12 built-in stitches, free arm, built-in buttonholer, reverse stitch function, adjustable stitch length and width, built-in light, foot pedal control.

FeatureDescription
12 Built-in StitchesIncludes straight, zigzag, stretch, and decorative stitches
Free ArmFor sewing sleeves, cuffs, and other tubular items
Built-in ButtonholerOne-step automatic buttonhole function
Reverse StitchFor reinforcing seam beginnings and ends
Adjustable Stitch Length0-4mm stitch length adjustment
Adjustable Stitch Width0-5mm stitch width for zigzag stitches
Built-in LightIlluminates sewing area
Foot PedalControls sewing speed
Spool PinsTop and vertical spool pin options
Bobbin SystemDrop-in bobbin with clear cover

Safety Instructions

Read all instructions before use. Keep machine away from children.

  1. Always unplug machine when not in use or during maintenance.
  2. Keep fingers away from moving parts and needle area.
  3. Do not use damaged power cords or plugs.
  4. Ensure proper ventilation around machine.

WARNING! Never operate with guards removed. Always use proper needles for fabric type.

Machine Setup

Unpack and assemble machine on stable surface.

  1. Place machine: Set on sturdy table with adequate workspace.
  2. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.
  3. Wind bobbin: Place thread on spool pin, follow bobbin winding diagram.
  4. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
  5. Connect power: Plug foot pedal into machine, then plug into power outlet.

CAUTION! Ensure machine is unplugged during setup and needle installation.

Specifications

Controls and Functions

Main controls: Stitch selection dial, stitch length dial, stitch width dial, reverse button, hand wheel.

Stitch Selection: Turn dial to select desired stitch pattern (1-12).

Stitch Length Dial: Adjusts stitch length (0-4mm). Higher numbers = longer stitches.

Stitch Width Dial: Adjusts zigzag width (0-5mm). For straight stitch, set to 0.

Reverse Button: Hold down to sew in reverse for reinforcement.

Hand Wheel: Manually raise/lower needle and advance machine.

Threading the Machine

Upper threading path: Follow numbered guides from spool to needle.

  1. Raise presser foot and needle to highest position.
  2. Place thread spool on spool pin.
  3. Follow threading path: Through first thread guide, down to tension discs.
  4. Thread take-up lever from right to left.
  5. Through lower thread guides to needle.
  6. Thread needle from front to back.

Tip: Always thread with presser foot raised to open tension discs.

Stitch Selection and Settings

Select appropriate stitch and settings for your project.

  1. Straight Stitch (1): General sewing, 2.5-3mm length for medium fabrics.
  2. Zigzag Stitch (2): Edge finishing, appliqué, width 3-4mm.
  3. Stretch Stitches (3-5): For knit fabrics, use stretch needle.
  4. Decorative Stitches (6-12): Various patterns for embellishment.
  5. Buttonhole (B): One-step automatic, use buttonhole foot.

WARNING! Always test stitch on fabric scrap before starting project.

Basic Sewing Techniques

Fundamental sewing operations for beginners.

  1. Starting: Hold thread ends, lower needle, sew few stitches forward.
  2. Reverse: Hold reverse button, sew 3-4 stitches backward.
  3. Straight line: Use seam guide on throat plate.
  4. Curves: Sew slowly, guide fabric gently.
  5. Finishing: Reverse stitch, raise needle, pull fabric to back.
  6. Buttonholes: Mark position, attach buttonhole foot, select B stitch.

CAUTION! Always lower presser foot before sewing.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

  1. Unplug machine before cleaning.
  2. Remove needle plate: Clean lint from bobbin area with brush.
  3. Oil machine: Use sewing machine oil on moving parts as directed.
  4. Replace needle: After 8-10 hours of sewing or if damaged.
  5. Cover machine: When not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil; never use household oils.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRe-thread machine; check tension settings; use quality thread.
Needle breakingBent needle/wrong sizeReplace needle; ensure correct needle for fabric; don't pull fabric.
Skipped stitchesDull needle/wrong typeReplace needle; use correct needle type for fabric.
Uneven stitchesIncorrect tensionAdjust upper tension; re-thread; check bobbin.
Machine jamsThread buildupRemove needle plate; clean bobbin area; re-thread.
No powerPower connectionCheck power cord; ensure foot pedal connected; check outlet.

Service: For technical support, contact Beldray customer service at 1-800-555-1234 or visit www.beldray.com

Beldray 12 Stitch Sewing Machine Instruction Manual © - All Rights Reserved 2025