Baby Lock Sewing Machine Xscape Manual

The Baby Lock Xscape is a versatile sewing machine designed for both beginners and experienced sewers, featuring automatic needle threading, built-in stitches, easy bobbin winding, adjustable stitch length and width, free arm capability, LED lighting, and multiple presser feet options. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory kit with presser feet, bobbins, needles, and instruction manual.

Feature	Description
Automatic needle threader	Easy threading without eye strain
Built-in stitches	Multiple stitch patterns including straight, zigzag, and decorative
Drop-in bobbin	Easy bobbin loading with clear cover
Free arm	For sewing cuffs and sleeves
LED work light	Bright illumination of sewing area
Stitch length/width adjustment	Customizable stitch settings
Reverse stitch button	For reinforcing seams
Presser foot pressure adjustment	For different fabric types
Power switch	Turns machine on/off
Speed control slider	Adjusts sewing speed

Unpacking and Setup

Carefully unpack all components and place on stable surface.

Remove machine from packaging: Lift from base, not carrying handle.
Attach foot pedal: Connect to machine port.
Connect power: Plug power cord into machine and electrical outlet.
Install accessory box: Place in designated compartment.
Insert needle: Follow threading diagram for proper orientation.

WARNING! Machine contains sharp needles; handle with care. Ensure stable work surface.

First-Time Operation

Power on machine; follow setup procedure.

Thread machine: Follow numbered threading path on machine.
Wind bobbin: Place empty bobbin on winder, thread through tension disc.
Insert bobbin: Drop bobbin into case with thread pulling counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Test sew: Use scrap fabric to test stitch quality.

CAUTION! Keep fingers away from needle during operation. Unplug when not in use.

Specifications

Machine Type: Electronic sewing machine
Stitches: 23 built-in stitches including utility and decorative
Stitch Length: Adjustable up to 4mm
Stitch Width: Adjustable up to 5mm
Buttonholes: 1-step automatic buttonhole
Presser Feet: Includes zipper foot, buttonhole foot, blind hem foot
Bobbin: Class 15 transparent bobbin
Needles: Standard domestic needles size 11/80
Power Requirements: 120V AC, 60Hz
Weight: 12.5 lbs

Controls and Settings

Main controls located on front and side panels. Stitch selection dial, stitch length dial, stitch width dial, reverse button, thread cutter.

Basic Operations: Power switch, foot pedal speed control, presser foot lever, hand wheel.

Stitch Settings: Length (0-4mm), Width (0-5mm), Pattern selection (1-23). Tension: Adjust upper thread tension dial (1-9). Needle Position: Center, left, right positions available.

Stitch Selection

Supports straight stitch, zigzag, stretch stitches, and decorative patterns.

Straight Stitch: Position 1-3 for basic sewing
Zigzag Stitch: Position 4-6 for finishing edges
Blind Hem: Position 7 for invisible hems
Decorative Stitches: Positions 8-23 for embellishments
Buttonhole: Position B for automatic one-step buttonholes

Tip: Always test stitch on scrap fabric before sewing project.

Maintenance and Care

Regular cleaning ensures optimal performance.

Clean bobbin area: Remove bobbin case and brush out lint
Oil machine: Apply sewing machine oil to designated points monthly
Change needle: Replace needle after every project or 8 hours of sewing
Cover machine: Use dust cover when not in use

WARNING! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Regulatory Information

UL Listed for safety standards. Complies with FCC Part 15 for electromagnetic interference. Copyright © Baby Lock. For technical support, visit www.babylock.com or contact 1-800-313-2537. Serial number located on machine base.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power connection	Check power cord connection; ensure foot pedal is plugged in.
Thread breaking	Tension/needle	Check thread tension; replace needle; rethread machine.
Uneven stitches	Threading/bobbin	Rethread upper and lower threads; clean bobbin area.
Needle hitting plate	Needle bent	Replace needle; ensure correct needle installation.
Fabric not feeding	Feed dogs	Check feed dog position; clean feed dogs.

Reset: Turn machine off and on to reset electronic functions.

Service: 1-800-313-2537; www.babylock.com