Anker RZ Sewing Machine Manual

The Anker RZ Sewing Machine is a versatile household sewing device featuring multiple stitch patterns, adjustable stitch length and width, built-in needle threader, free arm capability, automatic bobbin winding, reverse stitching function, built-in LED light, and adjustable presser foot pressure. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection 7. Threading & Bobbin 8. Maintenance & Cleaning 9. Accessories 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main body with free arm, Stitch selection dial, Stitch length/width controls, Built-in needle threader, Bobbin winding system, Reverse stitch button, LED work light.

FeatureDescription
Stitch Patterns23 built-in stitches including straight, zigzag, decorative
Stitch Length ControlAdjustable from 0-4mm
Stitch Width ControlAdjustable from 0-5mm for zigzag stitches
Built-in Needle ThreaderAutomatic needle threading assistance
Free ArmFor sewing sleeves and circular items
Reverse StitchReinforce seams with reverse stitching
Bobbin WindingAutomatic bobbin winding system
LED Work LightBuilt-in illumination for work area
Presser Foot PressureAdjustable for different fabric types
Power InputStandard power cord connection

Installation & Setup

Unpack and inspect all components. Place on stable, level surface.

  1. Remove packaging materials and protective covers from machine.
  2. Attach foot pedal to power cord and plug into wall outlet.
  3. Install needle: Loosen needle clamp screw, insert needle with flat side facing back, tighten screw.
  4. Wind bobbin: Follow bobbin winding instructions in threading section.
  5. Thread machine: Follow threading path indicated on machine.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

  1. Select straight stitch: Turn stitch pattern dial to straight stitch position.
  2. Set stitch length: Adjust to medium setting (2.5mm).
  3. Practice on scrap fabric: Use two layers of medium-weight fabric.
  4. Test reverse stitch: Hold reverse button while sewing.
  5. Experiment with speed control: Use foot pedal for variable speed.

CAUTION! Always start with needle in highest position. Keep work area clear.

Specifications

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch pattern dial, Stitch length dial, Stitch width dial, Reverse stitch button, Needle position button.

Stitch Selection: Rotate pattern dial to desired stitch (straight, zigzag, stretch, decorative). Stitch Length: Adjust for fabric thickness (shorter for fine fabrics, longer for heavy). Stitch Width: Adjust zigzag and decorative stitch width. Reverse: Hold button to reinforce seams. Needle Position: Change needle position for different sewing techniques.

Stitch Selection

Choose appropriate stitch for your project.

  1. Straight Stitch: Basic sewing, seams (position 1-2)
  2. Zigzag Stitch: Finishing edges, stretch fabrics (position 3-5)
  3. Blind Hem: Nearly invisible hems (position 6)
  4. Stretch Stitches: Knits and stretch fabrics (positions 7-9)
  5. Decorative Stitches: Embellishments (positions 10-23)
  6. Buttonhole: Automatic 4-step buttonhole (position 24)

Tip: Always test stitch on scrap fabric before starting project.

Threading & Bobbin

Proper threading ensures smooth operation.

  1. Upper Threading: Follow numbered path on machine, use built-in threader.
  2. Bobbin Winding: Place spool on pin, thread through tension disc, wind bobbin.
  3. Bobbin Insertion: Open bobbin cover, insert bobbin with thread pulling counterclockwise.
  4. Bring Up Bobbin Thread: Hold upper thread, turn handwheel toward you.
  5. Thread Tension: Adjust tension dial for balanced stitches.

WARNING! Ensure machine is unplugged during threading. Keep fingers clear of moving parts.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Daily: Brush out lint from bobbin area and feed dogs.
  2. Weekly: Oil moving parts with sewing machine oil (2-3 drops).
  3. Monthly: Clean tension discs with soft brush.
  4. Needle Replacement: Change needle after 8-10 hours of sewing.
  5. Storage: Cover machine when not in use.

CAUTION! Unplug before cleaning. Use only sewing machine oil.

Accessories

Included accessories and their uses.

AccessoryPurpose
Zigzag FootGeneral purpose sewing
Zipper FootInstalling zippers
Buttonhole FootCreating buttonholes
Button Sewing FootAttaching buttons
Additional BobbinsExtra bobbins for thread colors
NeedlesAssorted sizes for different fabrics
Seam RipperRemoving stitches
BrushCleaning lint
ScrewdriverNeedle plate removal

Regulatory Information

UL Listed: Complies with UL 1278 standard for household sewing machines. FCC Part 15: Class B digital device compliant. Copyright © 2024 Anker Sewing Machines; all rights reserved. For technical support, visit www.ankersewing.com or contact 1-800-555-ANKER. 25-year limited warranty on mechanical parts.

Troubleshooting

SymptomPossible CauseCorrective Action
Thread breakingIncorrect threading/tensionRe-thread machine; adjust tension; check for burrs on needle.
Skip stitchesWrong needle/damaged needleReplace needle; ensure correct needle for fabric type.
Machine jamsThread buildup/poor quality threadClean bobbin area; use quality thread; re-thread completely.
Uneven stitchesIncorrect tensionAdjust upper and bobbin tension; test on scrap fabric.
Needle breaksWrong needle size/bent needleUse correct needle size; ensure needle is straight; don't pull fabric.
No powerPower connection/foot pedalCheck power cord; ensure foot pedal is connected properly.

Reset: Unplug for 5 minutes to reset electronic components.

Service: 1-800-555-ANKER; www.ankersewing.com

Anker RZ Sewing Machine Manual © - All Rights Reserved 2025