2 in 1 Sewing Machine Manual

The 2 in 1 Sewing Machine is a versatile household sewing device that combines traditional sewing functions with overlock capabilities. This compact machine features adjustable stitch length and width, built-in stitch patterns, automatic needle threader, free arm capability, LED lighting, adjustable presser foot pressure, and built-in overlock function for professional finishing. Powered by 110-120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main sewing unit with built-in overlock function, Foot Pedal, Power Cord, Accessory Kit, LED Work Light, Bobbin Case, and various presser feet.

Installation

Unpack and inspect contents. Place on stable surface at comfortable working height.

1. Connect power cord: Plug into machine and wall outlet.
2. Attach foot pedal: Connect to machine port and place on floor.
3. Install needle: Loosen needle clamp screw, insert needle with flat side to back.
4. Thread machine: Follow threading guide printed on machine.
5. Wind bobbin: Place empty bobbin on winder and follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Setup

Power on machine; test basic functions.

1. Thread machine: Follow numbered threading path with spool of thread.
2. Insert bobbin: Place wound bobbin in case with thread pulling counterclockwise.
3. Test stitches: Use scrap fabric to test different stitch patterns.
4. Adjust tension: Test on fabric scrap and adjust upper tension as needed.
5. Set stitch length/width: Start with medium settings (2.5mm length, 3mm width).

CAUTION! Always turn handwheel toward you; never force the machine.

Specifications

• Machine Type: 2 in 1 Sewing and Overlock Machine
• Stitch Patterns: 12 built-in stitches including straight, zigzag, overlock
• Stitch Length: Adjustable 0-4mm
• Stitch Width: Adjustable 0-5mm
• Maximum Sewing Speed: 800 stitches per minute
• Needle System: HA-1, 130/705 H
• Bobbin Type: Class 15 transparent
• Presser Feet: Standard, zipper, buttonhole, overlock included
• Power Source: 110-120V AC, 60Hz
• Weight: 12 lbs (5.4 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch Selection Dial, Stitch Length Dial, Stitch Width Dial, Reverse Stitch Lever, Power Switch, LED Light Switch.

Stitch Selection: Turn dial to choose desired stitch pattern. Stitch Length: Control stitch spacing (0-4mm). Stitch Width: Control stitch width for zigzag and decorative stitches (0-5mm). Tension Control: Adjust upper thread tension (1-9 scale). Presser Foot Pressure: Adjust for different fabric types. Overlock Mode: Switch between regular sewing and overlock functions.

Connecting Accessories

Various accessories included for different sewing tasks.

1. Presser Feet: Lift presser foot lever, align foot with shank, lower lever to lock.
2. Extension Table: Snap into place around free arm for larger work surface.
3. Additional Spool Pins: Insert into holes for twin needle or decorative thread work.
4. Seam Guide: Attach to needle plate for consistent seam allowances.

Tip: Always raise needle to highest position before changing accessories.

Basic Sewing Operations

Follow these steps for basic sewing tasks.

1. Prepare fabric: Place fabric under presser foot, lower foot lever.
2. Start sewing: Press foot pedal gently to begin stitching.
3. Reverse stitching: Hold reverse lever to secure beginning and end of seams.
4. Guidance: Guide fabric gently; don't push or pull.
5. Finishing: Raise needle, lift presser foot, remove fabric and trim threads.
6. Buttonholes: Use buttonhole foot and follow automatic buttonhole sequence.
7. Zippers: Install zipper foot for invisible and standard zipper applications.

WARNING! Never sew over pins; remove them as you approach.

Overlock Function

Professional edge finishing with built-in overlock capability.

1. Switch to overlock mode: Turn stitch selection dial to overlock symbol.
2. Thread for overlock: Follow specific overlock threading path.
3. Adjust settings: Set appropriate stitch length and width for fabric.
4. Test on scrap: Always test overlock stitch on fabric scrap first.
5. Guide fabric: Keep fabric edge aligned with overlock guide.
6. Finishing: Trim excess thread chain after completing overlock.

CAUTION! Overlock stitches cannot be reversed; plan your sewing accordingly.

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Remove lint and dust from bobbin area and feed dogs regularly.
2. Oiling: Apply sewing machine oil to designated points every 3-6 months.
3. Needle replacement: Change needle after every 8 hours of sewing or for new project.
4. Storage: Cover machine when not in use to prevent dust accumulation.
5. Professional service: Have machine serviced annually for heavy use.

CAUTION! Unplug machine before cleaning or maintenance. Use only sewing machine oil.

Regulatory Information

UL Listed: Complies with UL safety standards for household sewing machines. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Sewing Machine Company; all rights reserved. For support, visit www.sewingmachinemanual.com or contact 1-800-555-SEWING.

Troubleshooting

Reset: Turn machine off and unplug for 30 seconds to reset electronics.

Service: 1-800-555-SEWING; www.sewingmachinemanual.com